|
|
 |
FAQ |
|
| Please read FAQ if you have some problems on your product. If you can not find answer in FAQ please contact us at cs@digital-cube.co.kr. |
| |
 Products [V43] How to boot up the product by recovery mode when the
F/W is damaged? |
|
|
This is an emergency recovery system when the power does not
turn because the S/W is damaged.
* Because firmware should be
reinstalled, the adaptor must be connected.
1. Press the Jog Key down and the button "¡Ý" as yellow rounded all
together.
2. Keep motion of No.1 and power on all
together.
3. Now, the V43 will boot up by recovery
mode.
4. After
boot up, please remove your hands from V43.
5.
Connect USB cable. The USB will be connected automatically.
6.
Reinstall the final F/W and disconnect the USB connection.
7. Now,
the V43 is recovered completely. |
|
|
| |
|
|
| |
|
| Section |
 |
Title |
|
Hits |
|
|
|
|
|
|
|
|
|
|
|
|
|
