|
|
| |
 |
Download |
|
| You can download the latest software or program. Click the link below for your product. |
| |
|
|
|
|
| |
| [PMP 1000] :: USA |
 Firmware |
|
| Firmware 1.26A U.S. |
|
 Download : 1[1].26a.zip (6.62 Mb) |
PMP1000 [FW Ver. 1.26A] => U.S Version
Dear U.S version users,
Pls try it again to upgrade 1.26A. There was a problem with the last version so we
upgrade it again after fixing it.
Check up your FW Ver. It should be "1.24A" otherwise you must upgrade upto 1.24A
first which is located on the below list.
=> Details of Improved features are on "Notice". Pls refer them.
** note : your battery must be fully charged to upgrade this firmware, or power
adaptor should be connected.
A. Unzip the attached file
B. Connect your PMP1000 to your PC by USB cable provided to download upgrade files
C. Drag [init] & [update] & [reset] and drop them to the root folder of your PMP1000
D. Disconnect your PMP1000
E. It will automatically update firmware with the progress bar, you can recognise it
(if you can not see anything, please connect USB and disconnect again)
F. Connect your PMP1000 again to download image file
G. Drag [image.tar] and drop it to the root folder of your PMP1000
H. Disconnect your PMP1000
I. You will see the firmware upgrading messages
J. It takes about 20 minutes
K. When it's finished, disconnect the USB cable
Pls check FW version as well as Bios Version.
Go to Accessory -> Help -> Information (They should be as below)
[FW version : 1.26A / Bios Version : 1.13K]
|
| |
|
|
|
|
 |
To read CoolZet manual, You'll need to download Abobe Acrobat Reader. |
|
| |
| |
|
| |
|
|
